Shure MXA902 + ANI USB Matrix

Shure MXA902 + ANI USB Matrix

Shure MXA902 from Shure combines a microphone array and loudspeaker in one elegant solution—ready for ceiling installation in boardrooms, meeting spaces, and similar environments. The mic and speaker are designed to cover a 20 x 20′ area right out of the box, and the unit requires only a single network connecting cable for power, control data, and encrypted audio

Shure ANI USB-MATRIX USB Audio Network Interface complements the existing ANI4IN, ANI4OUT, and ANI22 products. It offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A / V conferencing codec will be used.

The Shure ANI USB-MATRIX connects 4 Microflex® Advance™ or Microflex® Wireless microphone channels via Dante (4 in / 2 out), and provides analog connectivity (1 block in / 1 block out) to a room audio / video conferencing system or a PC-based A / V conferencing application via USB (1 in / out). An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs.

An integrated 2.5-inch wide-dispersion, high-output loudspeaker is optimized for voice reproduction to ensure effortless collaboration.

IntelliMix DSP applies automatic mixing, echo cancellation, noise reduction, and automatic gain control for a pristine audio mix.

An integrated ceiling device reduces clutter on tables and walls for a cleaner interior design.

Next-generation array architecture delivers enhanced low-frequency directionality and the most natural speech quality.

Unlike wall-mounted soundbars, a ceiling-mounted array mic and loudspeaker provide more consistent sound quality for participants.

MXA902

• Coverage Area Size: 20×20 ft (6.1×6.1 m)
• Coverage Type: Single-zone automatic
• Power Requirements: Power over Ethernet Plus (PoE+), Class 4
• Power Consumption: 24 W maximum
• Control Software: Designer
• Cable RequirementsvCat5e or higher (shielded cable recommended)
• Connector Type: RJ45
• Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
• Dust Protection: IEC 60529 IP5X Dust Protected
• Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)

ANI USB-MATRIX

• Inputs (Analog): 1 x 3-pin block connector (active balanced)
• Outputs (Analog): 1 x 3-pin block connector (impedance balanced)
• USB Connection: 1 x USB 2.0, Type-B
• Dante Connection: 1 x RJ45
• Channel Count: 4 inputs, 2 outputs
• Polarity: Non-inverting, any input to any output
• Power Requirements: Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
• Power Consumption: 6.5 W maximum
• Application Control: HTML5 browser based

Weight

• MXA902:
• A (Flange): 0.41″ (10.5mm)
• B (Edge to edge): 23.77″ (603.8mm)
• C (Height): 2.2″ (56.04mm)

MXA902

• 1 MXA902W-S array microphone with loudspeaker
• 8 Cable ties
• 3 Strain relief tabs
• 1 Rubber pad set

ANIUSB-MATRIX

• ANIUSB-MATRIX
• Mounting Bracket (1/3 rack unit)
• Hardware

1-year limited hardware warranty